+38 (068) 400 - 00- 15
Compression Elbows Irritec (Italy)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
-thumb-p.webp)
Irritec compression fittings (Italy): Reliable design of pipeline bends from Agras
When designing and installing modern automatic irrigation, water supply, and drip irrigation systems, it is almost impossible to do without the need to change the direction of water flow. Attempts to bend a polyethylene (HDPE) pipe manually at a right angle inevitably lead to its breakage, narrowing of the inner clearance, and a sharp drop in hydraulic pressure in the system. The most reliable, technologically correct, and durable solution for creating smooth and safe transitions is the original Irritec compression fitting (Italy). This connecting fitting (also known among professional installers as a compression elbow) allows you to instantly change the direction of the pipeline by exactly 90 degrees, guaranteeing absolute tightness of the connection and preservation of the system's full capacity. The Agras online store offers a complete range of compression fittings from the Italian brand Irritec, covering all popular diameters for private and commercial irrigation.
Structural perfection and materials of Irritec compression fittings
Each Irritec compression fitting is designed according to the strictest European quality standards. The fitting design consists of a corner-shaped body made of primary sorted polypropylene, dark green compression nuts with strong threads, internal support rings, cam clamps (white split rings), and ring seals made of wear-resistant nitrile rubber (NBR). The assembly process is extremely simple and fast: when the nut is tightened, the cam clamp firmly grips and bites into the polyethylene pipe, completely excluding its pulling out of the fitting even with strong hydraulic shocks or working pressure up to 16 bar.
The materials used by Irritec are characterized by complete environmental safety and resistance to external factors. They are not subject to corrosion processes, do not deteriorate under the influence of ultraviolet radiation and aggressive chemical compounds (for example, liquid fertilizers supplied through the irrigation system). The plastic retains its mechanical strength both during winter soil freezing and in summer heat, when the ambient temperature rises above 40 degrees. This makes Italian compression fittings the optimal choice for both underground laying in trenches and surface mounting of irrigation lines.
Diameters of Irritec compression fittings in the Agras catalog
To create a balanced and stable hydraulic circuit, it is important to use fittings of the corresponding cross-section. In the assortment of our store, you will find all the key types of original Italian elbows:
In root drip irrigation and private water supply systems, the Irritec 25 mm compression fitting is an indispensable element, designed for the most popular diameter of garden polyethylene pipes.
For the installation of medium-pressure main lines and bypassing corner obstacles on the site, the Irritec 32 mm compression fitting is most often used, which is the base standard in automatic landscape irrigation systems.
At large distribution nodes, where increased capacity and resistance to significant water volumes are important, the Irritec 40 mm compression fitting is used.
For main water supply lines from pumping stations and central water intake nodes, the powerful Irritec 50 mm compression fitting is used, which can withstand maximum operating loads in the system.
One of the main advantages of the compression method of connection is its reusability. If during operation it becomes necessary to change the geometry of the system, move the irrigation line, or replace a section of the pipe, the Irritec compression fitting can be easily disassembled by unscrewing the nut by hand or with a compression key, after which it can be reused in a new location without losing tightness.
Why is it worth ordering Irritec elbows in the Agras online store?
When buying irrigation components from us, you get original European products at a favorable price. We guarantee the stable availability of all Irritec compression fittings from 25 to 50 mm in our warehouse, which allows us to complete and ship your order in the shortest possible time. Our specialists are always ready to provide professional advice on choosing the necessary diameters and help design a reliable and durable irrigation system. Order original Irritec fittings in the Agras store and build professional irrigation systems that will work for decades!
Join our newsletter
Subscribe to our newsletter to get a discount.
Subscribe to our newsletter to get a discount.By subscribing, you agree to the processing of personal data.
