+38 (068) 400 - 00- 15
-thumb-p.webp)
Compression elbow Irritec 32×32 mm (90° angle for PE pipes) Italy
The Irritec 32×32 mm compression elbow is a high-quality, premium-class, push-fit angled connector from a leading Italian manufacturer. It is designed for a sealed 90-degree turn of the pipeline in automatic irrigation, water supply, and irrigation systems. The fitting is used to connect two polyethylene (PE) pipes of the same diameter of 32 mm. Thanks to the camlock mechanism, the elbow withstands a working pressure of up to 10 bar and is mounted without the use of special welding tools.
-
Delivery and Payment
-
Warranty
-
Return and Exchange
Full Product Description
Compression elbow Irritec 32×32 mm (90°): Flawless rotation of your irrigation system without pressure loss
Italian company Irritec(Iritec) is a recognized world leader in the production of components for irrigation and water supply. The constant introduction of innovative technologies, high qualification of engineers, and strict quality control allow the brand to create fittings that serve flawlessly for years, significantly exceeding the official warranty period.
The compression elbow (90°) with a diameter of 32 mm is a basic element in the design and installation of automatic irrigation systems, pumping stations, and water supply lines. It allows you to smoothly bypass obstacles on the site (building corners, fences, flowerbeds), change the direction of pipe laying, or lower the pipeline to the required depth in a trench at a right angle, minimizing the hydraulic resistance of the system.
Key benefits of Irritec 32×32 compression elbow:
Simple installation without special equipment: The clamp-based design of the fitting is designed to make installation as simple and quick as possible. Any unprepared person can easily install the elbow in their irrigation system on their own. No expensive welding machines or soldering irons are required — fixation on the pipe is carried out manually using a clamp nut or with the help of a light plastic wrench.
Maximum tightness under pressure: Thanks to the robust clamp and high-quality internal rubber NBR seal, the elbow withstands pressure up to 10 bar. It reliably fixes PE pipes 32 mm in diameter, eliminating the risk of leakage or disconnection during hydraulic shocks and pressure surges in the system.
Wear resistance and material safety: The product is made of primary high-density polypropylene. The material is resistant to ultraviolet radiation, temperature fluctuations, mechanical stress, and corrosion. The elbow is completely inert to chemical fertilizers used for plant nutrition and is certified for use with both technical and drinking water.
Reusability: Unlike welded elbows, the Irritec compression fitting can be installed and removed multiple times. This is very convenient for seasonal maintenance of the irrigation system, blowing out lines, or if you need to replan the area in the future.
Scope of application:
Rotation of distribution and main lines in automatic irrigation and drip irrigation systems by 90°.
Equipping transitions of pipelines from the depth of a trench to the surface to water consumers.
Use in household cold water supply systems, connection of filters and pump units.
Installation of blowdown and winter conservation nodes of the irrigation system.
Technical characteristics:
Manufacturer
Irritec
Country of origin
Italy
Fitting type
Compression elbow (angle connection)
Rotation angle
90°
Connection diameter
32 mm × 32 mm
Working pressure
up to 10 bar (atm)
Body material
High-performance technical polypropylene (PP)
Seal material
Wear-resistant NBR rubber
Purpose
Irrigation systems, water supply, PE pipelines
Installation tip from Agras.ua:Before starting the installation, clean the ends of the 32 mm PE pipes from dirt and dust, and also remove a small chamfer on the pipe cuts — this will protect the rubber seal inside the fitting from cuts and scratches. Loosen the elbow nuts a few turns, push both pipe ends inside until they stop (passing through the rubber seal), and then tighten the nuts with manual force. To ensure 100% tightness on the 32nd diameter, it is recommended to make a final tightening using a special compression or tape wrench.
All Specifications
Product Reviews
Leave a review
Join our newsletter
Subscribe to our newsletter to get a discount.
Subscribe to our newsletter to get a discount.By subscribing, you agree to the processing of personal data.
