+38 (068) 400 - 00- 15
-thumb-p.webp)
Compression Elbow Irritec 25×25 mm (90° angle for PE pipes) Italy
The Irritec 25×25 mm compression elbow is a high-quality, premium-class, push-fit elbow fitting from a leading Italian manufacturer. It is designed for a sealed 90-degree turn of the pipeline in automatic irrigation, water supply, and drip irrigation systems. The fitting is used to connect two polyethylene (PE) pipes of the same diameter of 25 mm. Thanks to the cam mechanism, the elbow withstands a working pressure of up to 10 bar and is mounted manually without the use of special welding tools.
-
Delivery and Payment
-
Warranty
-
Return and Exchange
Full Product Description
Compression elbow Irritec 25×25 mm (90°): Flawless rotation of your irrigation system without pressure loss
Italian company Irritec(Iritec) is a recognized global leader in the production of components for irrigation and water supply. The constant introduction of innovative technologies, high qualification of engineers, and strict quality control allow the brand to create fittings that serve flawlessly for years, significantly exceeding the official warranty period.
The compression elbow (90° elbow) with a diameter of 25 mm is a basic element in the design and installation of automatic irrigation and water supply systems. It allows you to smoothly bypass obstacles on the site (building corners, fences, flowerbeds), change the direction of the pipe laying or lower the pipeline to the required depth in the trench at a right angle, minimizing the hydraulic resistance of the system.
Key benefits of Irritec compression elbow 25×25:
Simple installation without special equipment: The clamp-based design of the fitting is designed to make installation as simple and quick as possible. Any unprepared person can easily install the elbow in their irrigation system on their own. No expensive welding machines or soldering irons are required — fixation on the pipe is carried out using a clamp nut by hand or using a light plastic key.
Maximum tightness under pressure: Thanks to the strong clamp and high-quality internal rubber NBR seal, the elbow stably withstands pressure up to 10 bar. It reliably fixes PE pipes 25 mm, eliminating the risk of leakage or disconnection during hydroblows and pressure surges in the system.
Wear resistance and material safety: The product is made of high-density primary polypropylene. The material is resistant to ultraviolet radiation, temperature fluctuations, mechanical stress, and corrosion. The elbow is completely inert to chemical fertilizers used for plant nutrition and is certified for use with both technical and drinking water.
Reusability: Unlike welded corners, the Irritec compression fitting can be installed and removed multiple times. This is very convenient for seasonal maintenance of the irrigation system, blowing out lines, or if there is a need to replan the area in the future.
Scope of application:
Rotation of lines and branches in automatic irrigation and drip irrigation systems at 90°.
Equipping transitions of the pipeline from the trench depth to the surface to water consumers.
Use in household cold water supply systems, connection of filters and pump units.
Installation of blowdown and winter conservation nodes of the irrigation system.
Manufacturer
Irritec
Country of origin
Italy
Fitting type
Compression elbow (corner connection)
Rotation angle
90°
Connection diameter
25 mm × 25 mm
Working pressure
up to 10 bar (atm)
Body material
High-strength technical polypropylene (PP)
Seal material
Wear-resistant NBR rubber
Purpose
Irrigation systems, water supply, PE pipelines
Installation tip from Agras.ua:Before starting the installation, clean the ends of the 25 mm PE pipes from dirt and dust, and also remove a small chamfer on the pipe cuts — this will protect the rubber seal inside the fitting from cuts and scratches. Loosen the elbow nuts a few turns, push both pipe ends inside until they stop (passing through the rubber seal), and then tighten the nuts by hand. For a diameter of 25 mm, this effort is quite enough to achieve 100% tightness.
All Specifications
Product Reviews
Leave a review
Join our newsletter
Subscribe to our newsletter to get a discount.
Subscribe to our newsletter to get a discount.By subscribing, you agree to the processing of personal data.
