+38 (068) 400 - 00- 15
-thumb-p.webp)
Compression plug plastic Irritec 25 mm (for PE pipes) Italy
Irritec Compression Plug 25 mm is a high-quality premium-class compression type fitting from a leading Italian manufacturer. Designed for quick, reliable, and fully hermetic closure of end sections of polyethylene (PE) tubes with a diameter of 25 mm in automatic irrigation, water supply, and irrigation systems. Thanks to the ferrule compression mechanism, the fitting withstands a working pressure up to 10 bar and is installed manually without the use of welding equipment or special tools
-
Delivery and Payment
-
Warranty
-
Return and Exchange
Full Product Description
Compression plug Irritec 25 mm: Reliable and fast sealing of PE pipes without welding
Italian company Irritec(Iritec) is a recognized world leader in the production of components for irrigation and water supply. The constant introduction of innovative technologies, high qualification of engineers, and strict quality control allow the brand to create fittings that serve flawlessly for years, significantly exceeding the official warranty period.
The compression (clamping) plug with a diameter of 25 mm is a basic element in the construction and modernization of automatic irrigation and water supply systems. It is installed at the ends of blind branches of the pipeline or in places of future expansion of the main line, ensuring 100% tightness of the line under pressure.
Key advantages of Irritec 25 mm compression plugs:
Maximum ease of installation: The clamp-based design of the fitting is designed to make the installation operation as simple as possible. Any unprepared person can easily install the part in their irrigation system on their own. No special equipment or welding machines are required for installation - fixation on the pipe is carried out using a clamping nut by hand or using a plastic key.
Reliability at high pressure: Thanks to the strong clamp and high-quality internal sealing ring, the plug withstands pressure up to 10 bar. It is reliably held on the PE pipe 25 mm, excluding the risk of fitting rupture or water leakage during sharp hydrodynamic fluctuations in the system.
Wear resistance and environmental friendliness: The product is made of primary high-density polypropylene. The material is resistant to ultraviolet radiation, temperature fluctuations, corrosion, and chemical compounds (for example, mineral fertilizers used for plant nutrition). The plug is certified for use with both technical and drinking water.
Reusability: Unlike welded or glued connections, the Irritec compression plug can be repeatedly installed and dismantled. This is very convenient for seasonal maintenance of the irrigation system, blowing lines, or if necessary, to extend the pipeline in the future.
Scope of application:
Tight plugging of the end sections of distribution lines of automatic irrigation with a diameter of 25 mm.
Organization of conservation points and winter water drainage on main pipelines.
Use in household cold water supply systems, connection of pumping units and tanks.
Temporary closure of water supply lines during repair or construction work.
Technical characteristics:
Manufacturer
Irritec
Country of origin
Italy
Fitting type
Compression plug (clamping)
Connection diameter
25 mm
Working pressure
up to 10 bar (atm)
Body material
High-performance technical polypropylene (PP)
Seal material
Wear-resistant NBR rubber
Purpose
Irrigation systems, water supply, PE pipelines
Installation tip from Agras.ua:Before installing the plug, be sure to clean the end of the PE pipe 25 mm from dirt, dust, and remove a small chamfer on the pipe cut. Loosen the clamping nut of the fitting by a few turns, push the pipe inside through the rubber seal ring until it stops, and then tighten the nut firmly by hand. For a diameter of 25 mm, manual tightening is usually quite enough for complete tightness.
All Specifications
Product Reviews
Leave a review
Join our newsletter
Subscribe to our newsletter to get a discount.
Subscribe to our newsletter to get a discount.By subscribing, you agree to the processing of personal data.
