+38 (068) 400 - 00- 15
-thumb-p.webp)
Compression Elbow Irritec 25×3/4" IP (Internal Thread) Italy
The Irritec 25×3/4" VR compression elbow is a high-quality, premium-class, push-fit angled connector from a leading Italian manufacturer. It is designed to transition from a 25 mm diameter polyethylene (PE) pipe to a threaded connection with an internal thread of 3/4" at a 90-degree angle. It is widely used in automatic irrigation systems, drip irrigation, and water supply systems to connect retractable sprinklers (rainbirds), solenoid valves, water distribution columns, or plastic and metal taps. The fitting is designed for a working pressure of up to 10 atm (bar).
-
Delivery and Payment
-
Warranty
-
Return and Exchange
Full Product Description
Compression elbow Irritec 25×3/4" F: Convenient and reliable threaded connection for irrigation systems
Italian company Irritec(Iritec) is a recognized global leader in the production of compression fittings and irrigation systems. Thanks to the use of high-quality raw materials and strict control at all stages of production, Irritec fittings serve flawlessly for years, significantly exceeding the official warranty period.
The 25×3/4" internal threaded elbow is one of the most sought-after fittings for equipping automatic lawn and garden irrigation systems. It allows you to output the line from the 25 mm PE distribution pipe at a 90° angle directly to the threaded connection of rotary sprinklers, static sprayers with high water consumption, valve boxes, or other shut-off valves with a popular 3/4" thread.
Irritec fitting design and step-by-step operating principle:
The reliable design of the Irritec compression node consists of five main elements that provide quick installation and absolute tightness of the connection:
Clamping nut— an external clamping element that, when screwed on, reliably fixes and clamps the fitting to the PE pipe.
Stop (collet) ring— clearly lies on the outer wall of the pipe, resting against the clamping nut and the retaining ring during installation, preventing the pipe from being pulled out of the fitting under working pressure.
Retaining ring (bushing)— holds and evenly presses the inner seal when tightening the nut.
Sealing gasket— an elastic ring made of wear-resistant NBR rubber, which tightly surrounds the pipe and guarantees 100% tightness of the connection, completely eliminating water leakage.
Fitting body— a sturdy polymer body in the shape of a 90° elbow with a transition to a strong internal thread 3/4".
Key benefits of the Irritec 25×3/4" F elbow:
Ease of installation without special equipment: The collet clamping design allows you to install the fitting in seconds. Any person without professional training can fix the elbow on the pipe manually, without using welding equipment or soldering irons.
High working pressure (10 atm): The fitting is designed for operation under stable working load. It is resistant to sharp hydrodynamic shocks and pressure fluctuations in the mainline during pump station starts.
Resistance to aggressive environments and UV: High-quality plastic is not destroyed by direct sunlight, is not afraid of temperature fluctuations, and is completely inert to chemical fertilizers added to water for plant nutrition.
Technical characteristics:
Manufacturer
Irritec
Country of origin
Italy
Fitting type
Compression elbow with internal thread (F)
Bend angle
90°
Compression connection diameter
25 mm
Internal thread size
3/4" (three quarters of an inch)
Working pressure
up to 10 atm (bar)
Body material
High-strength technical polypropylene (PP)
Seal material
Wear-resistant NBR rubber
Purpose
Automatic irrigation systems, water supply, irrigation
Installation tip from Agras.ua:Before installing the elbow, be sure to clean the end of the 25 mm PE pipe from dirt and remove a small chamfer from the pipe cut to avoid damaging the rubber seal inside the body. To seal the threaded connection 3/4", always use high-quality sealing materials — for example, Teflon FUM tape Koer or sanitary thread. Wind the sealant onto the external thread of the mating part clockwise and tighten the connection tightly, but without excessive force, to avoid damaging the plastic thread turns.
All Specifications
Product Reviews
Leave a review
Join our newsletter
Subscribe to our newsletter to get a discount.
Subscribe to our newsletter to get a discount.By subscribing, you agree to the processing of personal data.
