+38 (068) 400 - 00- 15
Plastic Clamp Saddle Irritec 32 x 3/4" BR (Insert for PE pipes) Italy
Irritec 32 x 3/4" (internal thread) saddle (insert) is a high-quality premium-class pipeline element from a leading Italian manufacturer. Designed for quick creation of additional branches or connection of sprinklers, valves, and automation blocks directly to an existing polyethylene (PE) mainline with a diameter of 32 mm without cutting it. The mounting outlet has an internal thread of 3/4". The insert is rated for a working pressure up to 6 bar, comes with a sealing rubber gasket and galvanized steel bolts, ensuring ease of installation and long-term operation.
-
Delivery and Payment
-
Warranty
-
Return and Exchange
Full Product Description
Clamp-on saddle Irritec 32 x 3/4" F: Reliable branching from the main line without cutting the pipe
Italian company Irritec(Iritec) is a recognized world leader in the production of components for irrigation and water supply. The constant introduction of innovative technologies, high qualification of engineers, and strict quality control allow the brand to create fittings that serve flawlessly for years, significantly exceeding the official warranty period.
The compression saddle (insert-coupling) for a 32 mm pipe with a 3/4" threaded outlet is an ideal engineering solution for modernizing or installing irrigation systems. It allows you to quickly create a new water collection point on the main line. To do this, it is enough to clamp the saddle on the pipe using bolts and drill a hole in the pipe wall through the threaded outlet.
Key advantages of Irritec saddle inserts:
Maximum ease of installationThe design of the insert is designed so that the installation operation is as simple as possible. Any unprepared person can easily install the part in their irrigation system on their own. For installation, only a minimal set of tools is required (a wrench for bolts and a drill with a suitable drill bit).
Complete tightness of the systemIrritec saddles are equipped with special profiled rubber gaskets by default. They fit tightly to the contour of the PE pipe and completely eliminate the risk of water leakage even with constant hydrodynamic fluctuations in the main line.
Strength and corrosion resistance of the designThe halves of the coupling are made of primary technical polymer of high density, resistant to UV radiation and mechanical stress. For reliable fastening and durability, the node is equipped with strong steel bolts and nuts that are not prone to rapid oxidation in wet soil.
Preservation of the integrity of the main lineUnlike standard compression tees, the installation of the saddle does not require cutting the 32 mm pipe, which significantly saves the installer's time, reduces the number of joint connections, and preserves the linear strength of the pipeline.
Scope of application:
Installation and connection of retractable sprinklers (rotors, sprays) directly to the main or zone lines of automatic irrigation with a diameter of 32 mm.
Creation of additional drip irrigation or fogging lines from an existing main pipe.
Insertion of system blow-down nodes with compressed air before winter conservation, installation of drain valves, or installation of control sensors.
Organization of additional points of quick access to water (water outlets/hydrants) on the site.
Technical characteristics:
Manufacturer
Irritec
Country of origin
Italy
Type of fitting
Clamp-on saddle (insert-coupling)
Diameter of the main pipe
32 mm
Type and size of outlet
Internal thread (F) 3/4"
Working pressure
up to 6 bar (atm)
Body material
High-strength technical polyethylene / PP
Package includes
Sealing rubber gasket, metal bolts
Purpose
Automatic irrigation systems, drip irrigation, and water supply
Installation tip from Agras.ua:Before installing the saddle, carefully clean the pipe surface from dirt, dust, or burrs at the point of contact with the rubber seal. Tighten the bolts evenly from both sides in turn to avoid skewing the body. It is recommended to drill a hole in the pipe directly through the threaded outlet of the saddle using a wood/plastic drill bit, trying not to damage the internal thread 3/4".
All Specifications
Product Reviews
Leave a review
Join our newsletter
Subscribe to our newsletter to get a discount.
Subscribe to our newsletter to get a discount.By subscribing, you agree to the processing of personal data.
