+38 (012) 345 67 89
Pressure reducer to 1 bar (14.5 PSI) with 1" female thread
Powerful main pressure regulator for drip irrigation systems. Stabilizes the inlet pressure (up to 8.3 bar) to a safe level of 0.9–1.1 bar. It has a 1" internal thread, which allows it to be mounted directly on the outlet of filters or large diameter faucets. Protects the drip tape from damage
-
Delivery and Payment
-
Warranty
-
Return and Exchange
Full Product Description
1 bar pressure reducer: Maximum safety for drip tape
Pressure reducer to 1 bar is a critical component for professional and domestic irrigation systems. Most drip tapes are designed for a working pressure of 0.5 – 1.2 bar. Connecting the system directly to a pump or central water supply where the pressure can reach 3-6 bar will cause the tape to break and the system to fail.
This reducer works on the principle of a labyrinth: the flow of water, getting inside, is dissected and loses its kinetic energy, which ensures a smooth and stable pressure at the outlet.
Advantages of pressure reducer 1":
-
Optimum diameter: Internal thread 1" provides high throughput and allows mounting the reducer on trunk nodes without adapters.
-
Protection against water hammer: The device eliminates sharp pressure jumps that often occur when pumping equipment is started or when the network load changes.
-
Perfect pouring: Thanks to the maintenance of a stable pressure (0.9–1.1 bar), the droppers on the tape work in passport mode, issuing exactly the amount of water that the plants need.
-
Durability: Made of impact-resistant technical plastic, resistant to corrosion, ultraviolet light and prolonged contact with moisture.
Installation recommendations:
For maximum durability, the reducer is recommended to be installed after the filter (at the outlet). This will protect the internal labyrinth of the device from clogging with small particles of sand or rust contained in the water.
Technical characteristics:
-
Connection thread: 1" VR (internal thread);
-
Inlet pressure: 1.3 – 8.3 bar;
-
Outlet pressure: 0.9 – 1.1 bar;
-
Body material: High-quality polymer;
-
Application: Drip tape, low pressure fogging.
All Specifications
Product Reviews
Leave a review
Recently Viewed
-thumb-p.webp)
Join our newsletter
Subscribe to our newsletter to get a discount.
Subscribe to our newsletter to get a discount.By subscribing, you agree to the processing of personal data.
