+38 (068) 400 - 00- 15
-thumb-p.webp)
Compression plug plastic Irritec 50 mm (for PE pipes) Italy
Compression plug Irritec 50 mm is a high-quality connecting fitting of the clamp type of premium class from the leading Italian manufacturer. It is designed for quick, reliable and completely hermetic closure (silencing) of the end sections of large-diameter 50 mm polyethylene (PE) main pipes in automatic irrigation systems, industrial water supply and irrigation. Thanks to the cam-clamping mechanism, the fitting withstands a working pressure of up to 10 bar and is mounted without the use of welding equipment.
-
Delivery and Payment
-
Warranty
-
Return and Exchange
Full Product Description
Compression plug Irritec 50 mm: Uncompromising tightness of PE pipes
Italian company Irritec(Iritec) is a recognized world leader in the production of components for irrigation and water supply. The constant introduction of innovative technologies, high qualification of engineers, and strict quality control allow the brand to create fittings that serve flawlessly for years, significantly exceeding the official warranty period.
The compression (clamp) plug with a diameter of 50 mm is an indispensable element in the arrangement of powerful main nodes, automatic irrigation systems for large areas, and pumping stations. It is installed at the ends of blind branches of the pipeline or in places of future system expansion, ensuring 100% tightness of the line under pressure.
Key advantages of Irritec 50 mm compression plugs:
Ease of installation on large diameters: The clamp construction of the fitting simplifies installation work on the main line. No welding equipment or complex tools are required to fix the pipe - the connection is tightened using a special compression key, which significantly accelerates the installation process.
Reliability at high pressure: Thanks to the strong clamp (clamping ring) and high-quality internal seal, the plug withstands pressure up to 10 bar. It is reliably held on the PE pipe 50 mm, eliminating the risk of fitting rupture or water leakage during hydraulic shocks in the system.
Wear resistance and chemical inertness: The product is made of primary high-density polypropylene. The material is resistant to ultraviolet radiation, temperature fluctuations, corrosion, and chemical compounds (including concentrated mineral fertilizers used for plant nutrition). The plug is certified for use with both technical and drinking water.
Repeated use: Unlike welded or glued connections, the Irritec compression plug can be repeatedly disassembled and reassembled. This is very convenient for seasonal maintenance of the irrigation system, blowing out lines with compressed air in winter, or extending the main line in the next season.
Scope of application:
Tight plugging of the end sections of distribution and main pipelines of automatic irrigation systems with a diameter of 50 mm.
Organization of conservation points and seasonal drainage of water on high-loaded pipelines.
Use in industrial and domestic cold water supply systems, connection of pumping units and tanks.
Temporary closure of water supply lines during repair or construction work.
Technical characteristics:
Manufacturer
Irritec
Country of origin
Italy
Fitting type
Compression plug (clamp)
Connection diameter
50 mm
Working pressure
up to 10 bar (atm)
Body material
High-strength technical polypropylene (PP)
Seal material
Wear-resistant NBR rubber
Purpose
Irrigation systems, water supply, main PE pipelines
Installation tip from Agras.ua:Before installing the plug, be sure to clean the end of the PE pipe 50 mm from dirt, dust, and remove a small chamfer at the pipe cut to avoid damaging the rubber ring. Loosen the clamp nut of the fitting by a few turns, push the pipe inside through the rubber seal to the stop. Due to the large diameter of the pipe (50 mm), for maximum tightness, be sure to make a final tightening of the clamp nut using a special compression or tape key.
All Specifications
Product Reviews
Leave a review
Join our newsletter
Subscribe to our newsletter to get a discount.
Subscribe to our newsletter to get a discount.By subscribing, you agree to the processing of personal data.
