+38 (068) 400 - 00- 15
Plastic clamping saddle Irritec 50 x 1" Spigot (spigot for PE pipes) Italy
The compression fitting (saddle) Irritec 50 x 1" VR is a high-quality pipeline element of the premium class from the leading Italian manufacturer. It is designed for quick creation of a full-bore branch or connection of electromagnetic valves, main filters and shut-off valves directly to the operating polyethylene (PE) pipe with a diameter of 50 mm without cutting it. The mounting outlet has an internal thread of 1". The saddle is designed for a working pressure of up to 6 bar, equipped with a sealing rubber gasket and galvanized steel bolts, which provides maximum ease of installation and long-term operation.
-
Delivery and Payment
-
Warranty
-
Return and Exchange
Full Product Description
Clamp-on saddle Irritec 50 x 1" F: Effective tapping into a large diameter main
Italian companyIrritec(Iritec) is a recognized global leader in the production of components for irrigation and water supply. The constant introduction of innovative technologies, high qualification of engineers, and strict quality control allow the brand to create fittings that serve flawlessly for years, significantly exceeding the official warranty period.
The compression saddle (tapping sleeve) for a 50 mm pipe with a large outlet for 1" threading is the most rational engineering solution for modernizing and expanding powerful irrigation systems. It allows you to quickly create a new full-size water intake point on the main pipeline. To do this, it is enough to clamp the saddle on the pipe using four bolts and drill a hole in the pipe wall through the threaded outlet.
Key advantages of Irritec saddle taps:
Maximum ease of installation: The design of the tap is developed so that the installation operation is intuitively understandable and simple. Any unprepared person can easily install the part in their irrigation system on their own. For installation, only a minimal set of tools is required (wrench and drill with the corresponding drill or milling cutter).
Complete tightness of the system: Irritec saddles are equipped with special profiled rubber gaskets by default. They perfectly fit the contour of a large-diameter PE pipe and completely eliminate the risk of water leakage even with constant hydrodynamic fluctuations and high flow intensity.
Strength and corrosion resistance of the design: The halves of the sleeve are made of primary technical polymer of high density, resistant to UV radiation and mechanical stress. For reliable fastening and durability, the node is equipped with strong steel bolts and nuts that are not prone to rapid oxidation in a humid environment or soil.
Time and material savings: Unlike standard compression tees with a diameter of 50, the installation of the saddle does not require cutting the pipe. This significantly saves the installer's time, reduces the number of expensive flanged connections, and completely preserves the linear strength of the pipeline.
Scope of application:
Quick installation and connection of 1" electromagnetic valves directly to the main 50 mm pipe.
Installation of powerful disk or mesh filters, shut-off valves, and system blow-down nodes with compressed air before winter.
Organization of additional points of quick access to water (water outlets/hydrants) in areas with a large area.
Creation of branches for new zonal drip irrigation or fogging lines from an existing main pipeline.
Technical characteristics:
Manufacturer
Irritec
Country of origin
Italy
Type of fitting
Clamp-on saddle (tapping sleeve)
Diameter of the main pipe
50 mm
Type and size of outlet
Internal thread (F) 1"
Working pressure
up to 6 bar (atm)
Body material
High-strength technical polyethylene / PP
Package includes
Sealing rubber gasket, metal bolts
Purpose
Automatic irrigation systems, drip irrigation, and water supply
Installation tip from Agras.ua:Before installing the saddle, carefully clean the surface of the 50 mm pipe from dirt, dust, or burrs at the place of contact with the rubber seal. Tighten the bolts crosswise and evenly from all sides to avoid skewing the plastic body. It is recommended to drill a hole in the pipe directly through the threaded outlet of the saddle using a pilot drill of the corresponding diameter, trying not to damage the internal thread 1".
All Specifications
Product Reviews
Leave a review
Join our newsletter
Subscribe to our newsletter to get a discount.
Subscribe to our newsletter to get a discount.By subscribing, you agree to the processing of personal data.
